What is the stone complete processing line?

Source: adminDate: 2024-10-25

The whole set Stone complete processing line consists of

1). Hammer crusher, bucket elevator, storage hopper, vibrating feeder,

2). Main unit, inverter classifier, cyclone collector, pulse deduster system,

3). High-pressure positive blower, air compressors, and electrical control systems.

The Working progress of Stone complete processing line:

After being crushed by a hammer crusher, the large materials become small ones and are sent to the storage hopper by elevator, and then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe.

When the grinding mill is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.

The high-pressure air blower constantly inhales air within the grinding mill and, in turn, the airflow with crushed materials is brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, move to the dust cleaner, and cling to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get the finished powders packed. In addition, filtered clean air will be emitted from the air outlet of the muffler in the end.

Recommended Products

Recommended Cases

Get Plans And Quotes

Service Advantage

Founded in 1973

Founded in 1973

Founded in 1973, is one of the two major manufacturers of grinding equipment designated by the former Ministry of Electrical and Mechanical Services.

Dozens of patents

Dozens of patents

The independently developed intelligent system enables fault monitoring and early warning to ensure the safe operation of the equipment.

Customization

Customization

Break through the traditional methods and customize according to needs, improve equipment utilization and improve customer benefits.

Butler service

Butler service

Combining online and offline, multiple ways to train and guide users on their use and management.